These MT Series are engineered for operation, either open-close or modulating
of multi-turn valves such as gate valve, globe valve, sluice gate or linear motion applications in hazardous locations.
The unit fitted with gear box can be used for operation of quarter turn units such as butterfly valve,
ball valve, plug valve and damper.
|
Model |
Torque(kgf.m) |
Output Speed(RPM) |
Motor(kW) |
Stem Dia.(mm) |
Flange ISO5210 |
|
MT-5 |
6 |
20 40 60 |
0.2 |
Φ25 |
F07 |
|
MT-15 |
15 |
20 40 60 |
0.4 |
Φ35 |
F10 |
|
MT-30 |
30 |
20 40 60 |
0.75 |
Φ45 |
F12 |
|
MT-60 |
60 |
20 40 60 |
1.5 |
Φ50 |
F16 |
|
MT-100 |
100 |
20 40 60 |
2.2 |
Φ75 |
F16 |
|
MT-150 |
150 |
20 40 60 |
3.7 |
Φ75 |
F16 |
|
MT-300 |
300 |
20 40 60 |
5.5 |
Φ75 |
F30 |
|
MT-800 |
800 |
20 40 60 |
0.75 |
Φ110 |
F35 |
|
MT-2500 |
2500 |
20 40 60 |
1.5 |
Φ120 |
F40 |
Enclosure: Cast aluminum, water tight rated for IP67 and explosion proof rated for EX d IIC T4,
and Class I, Division 1, Group B,C & D, and Class II, Division 1, Group E,F & G.
Motor: F class insulation AC motor.
Electric Source: 220/380/440/VAC/3ph, 60/50Hz
Gearing: Lubricated helical gearing and worm and worm wheel.
Position Indicator: Continuous visual indicator.
Position Limit Switches: Open-close limit switches.
Torque Switches: When the setting torque is over, the disc spring mechanism shall trip the both limit switches to stop the motor.
Manual Handwheel: When the power is failed or to set switches, the handwheel shall be used for manual operation
after switching by the declutch lever.
Drive Bushing: Removable mounting bushing can be machined separately to fit on valve easily.
Heater: Anti-condensation.